HDG Anchor Bolts Shipped to a Southeast Asia Steel Structure Project
A batch of hot-dip galvanized J type and L type anchor bolts for a pre-engineered steel warehouse project in Southeast Asia has passed final inspection and been loaded into containers. Each size is boxed by building grid line and labeled so the site team can install directly by position...
The shipment covers more than 3,800 anchor bolts in sizes M24 to M36, produced to ASTM F1554 Gr.55 and hot-dip galvanized to ISO 1461 coating thickness requirements. J type and L type hooks were supplied for a pre-engineered warehouse where column bases are pinned, so anchor positioning accuracy directly drives erection speed.
Threads were rolled after bending so no post-galvanizing tapping is needed and the zinc layer stays intact at the thread roots. Coating thickness was sampled per heat, and every bolt line was re-checked for thread fit, hook radius and overall length before loading, with results recorded in the inspection report.
Packing follows the building grid line: each wooden crate serves one group of grid positions and is labeled with size, quantity and grid reference, with a detailed packing list in the shipping documents. The erection crew picks bolts by drawing position with no re-sorting on site, which saves hours of checking before the concrete pour.
From drawing confirmation to container gating out took 26 days. The delivery includes a suggested installation torque sheet, a matched washer list and 2 percent spare bolts to cover site cutting and loss. GURONG Fastener keeps common sizes in stock for repeat warehouse projects and can shorten lead times on follow-up orders.


