Hot-dip galvanized J type, L type, 7 type and cast-in embed anchor bolts for steel structures, transmission towers and concrete foundations. Full metric and imperial size coverage, with a genuine MTC 3.1 material report attached to every batch.
Hot-dip galvanized J type, L type, 7 type and cast-in embed anchor bolts for steel structures, transmission towers and concrete foundations. Full metric and imperial size coverage, with a genuine MTC 3.1 material report attached to every batch.
High strength friction grip (HSFG) bolts, twist off tension control bolts, square head tower bolts and heavy hex structural bolts for steel frames, transmission towers and bridge connection joints.
High strength friction grip (HSFG) bolts, twist off tension control bolts, square head tower bolts and heavy hex structural bolts for steel frames, transmission towers and bridge connection joints.

Latest Products

  • L Shaped Rebar Dowel Pin

    L Shaped Rebar Dowel Pin

    #L shaped dowel pins made from ribbed rebar, used for load transfer across concrete slab joints, pavement load transfer and precast connections. Cut, bent and galvanized to your cutting list and shipped together with your anchor bolt order — one supplier less to manage.
  • Embedded Anchor Bolt Assembly with Welded Plate

    Embedded Anchor Bolt Assembly with Welded Plate

    #Cast-in anchor bolt assemblies: studs welded to a square or round plate form a rigid template that can be poured directly into the concrete. Ideal for tower feet, masts and heavy column bases where bolt spacing accuracy is critical. Welding, hot-dip galvanizing and matching nuts are supplied as one ...
  • Hot-Dip Galvanized L Type Anchor Bolt

    Hot-Dip Galvanized L Type Anchor Bolt

    #L type (90 degree bent) anchor bolts are used for cast-in fixing of steel columns, brackets and equipment foundations. The bent end anchors into the concrete while the threaded end stands proud of the foundation top for base plate installation. Standard for export projects: heavy HDG hot-dip galvani...
  • Hot-Dip Galvanized J Type Anchor Bolt

    Hot-Dip Galvanized J Type Anchor Bolt

    #J type anchor bolts (hooked anchor bolts) are widely used for fixing steel structures and concrete foundations of transmission towers and poles. The hooked end provides reliable anchorage without a base plate. Strictly heavy HDG hot-dip galvanized coating — never electro-galvanized or re-galvanized ...
  • Heavy Hex Structural Bolts ASTM A325 / A490

    Heavy Hex Structural Bolts ASTM A325 / A490

    #Heavy hex structural bolts for bearing-type connections in buildings, frames and machinery. Head and wrench sizes follow the heavy hex series with matching heavy hex nuts. Quenched and tempered medium carbon steel grades available; HDG, PTFE or Xylan coatings on request.
  • Square Head Tower Bolt for Transmission Lines

    Square Head Tower Bolt for Transmission Lines

    #Square head tower bolts (pole line bolts) are used on lattice transmission towers and for angle and tubular pole connections. The square head self-locks against rotation while tightening and the tapered neck seats into angle steel holes. Supplied with heavy hex or square nuts and beveled washers as ...
  • Twist Off Type Tension Control Bolts (TC)

    Twist Off Type Tension Control Bolts (TC)

    #Twist off type high strength bolts (TC bolts, S10T system) apply pretension quickly and reliably without calibrated torque wrenches. The spline end snaps off automatically when the design pretension is reached, so the clamping force of every joint can be verified — the first choice for fast-track st...
  • High Strength Friction Grip Bolts (HSFG) Heavy Hex

    High Strength Friction Grip Bolts (HSFG) Heavy Hex

    #HSFG high strength bolts are used for friction-type connections in steel frames, bridges and towers. Controlled yield and tensile strength with the ability to apply pretension, supplied as a complete set with heavy hex nuts and hardened washers. Every batch: true HDG coating and a genuine MTC 3.1 re...
  • Tie Rods and Sag Rods for Bracing

    Tie Rods and Sag Rods for Bracing

    #Rod bracing systems: open eye, closed eye or threaded tie rods and sag rods with turnbuckles and purlin cleats. A complete bracing package for purlin and wall girt stability in pre-engineered steel buildings, shipped in one container with your anchor and structural bolt order.
  • ACME Trapezoidal Threaded Rod 4 TPI

    ACME Trapezoidal Threaded Rod 4 TPI

    #ACME/trapezoidal threaded rods (e.g. the 4 threads-per-inch lead screw series) for jacks, presses, gate hoists and adjustment mechanisms. The thread flanks are stronger than metric coarse threads and transmit higher loads; steel or stainless, ends machinable.
  • Double End Stud Bolts

    Double End Stud Bolts

    #Double end studs for flange connections, anchoring installations and equipment bases, including the embedded-end coarse thread (125% type) variant for concrete and steel applications. Heavy hex nuts are packed in the same box — the site team never waits for the other half.
  • Fully Threaded Stud Bar (Threaded Rod)

    Fully Threaded Stud Bar (Threaded Rod)

    #Fully threaded stud bars (threaded rods) are used for hangers, tie supports, chemical anchoring and flange connections. Rolled or cut threads with stable fit, plain or HDG finish, stainless 304/316 and AISI 4140 alloy options. Standard 3 meter bars or cut to length with chamfered ends per order.
  • Wedge Expansion Anchor Bolt

    Wedge Expansion Anchor Bolt

    #Mechanical wedge expansion anchor for heavy post-installed fixing in solid concrete: machine bases, brackets, guardrails and steel frames. Through-bolt with hex nut style, electro- or hot-dip galvanized, with published embedment and spacing tables.
  • Chemical Anchor Bolt with Resin Capsule

    Chemical Anchor Bolt with Resin Capsule

    #Post-installed chemical anchoring: threaded studs with vinyl ester or epoxy resin capsules for cracked and uncracked concrete. High pull-out capacity and good edge distance tolerance, studs in HDG or stainless, matched-size nozzle brushes included for fast installation.
  • Hot-Dip Galvanized Spring Washers and Flat Washers

    Hot-Dip Galvanized Spring Washers and Flat Washers

    #Full washer range: split spring washers, flat washers and large series washers, plus hardened beveled washers for structural connections. Galvanized in the same HDG process as the bolts and nuts so the faying surface friction and coating life stay consistent across the whole joint.
  • Hot-Dip Galvanized Heavy Hex Nuts

    Hot-Dip Galvanized Heavy Hex Nuts

    #Heavy hex nuts matched to structural and anchor bolts, rolled threads with full HDG coverage that survives assembly wear. Grades 8/10, coarse and fine series complete, supplied with your bolt order so the coating and grade always match the fastener.

About Us

GURONG Fastener Co., Ltd. is built on one core principle: act in the interest of engineering clients. We left behind low-quality, low-price general hardware and focus on hot-dip galvanized (HDG) fasteners for infrastructure projects - anchor bolts, high-strength structural bolts, threaded rods, chemical and expansion anchors with matching nuts and washers - so overseas contractors and traders no longer face substandard materials, thin or re-galvanized zinc coatings, missing acceptance documents or delayed deliveries. One supplier, one settlement, one delivery, with genuine MTC 3.1 material certificates for every batch.

Send